|
 |
Mirror Type Bluetooth Handsfree
Kit
(MHF-R330BT) |
|
| Products |
 |
Bluetooth Handsfree Kit |
|
|
|
|
|
| ¡ß Summary ¡ß Specification ¡ß How
to Use ¡ß Installation Image
|
|
|
|
|
How to Use |
|
|
|
| >> Installation
guide
|
|
|
|
|
|
|
| ¨ç On the back of the MHF-R330BT unit you will see two pairs of clips.
Place the bottom
pair of clips on the underside of your existing rearview
mirror. Lift the unit so that the bottom
clips extend allowing the top clips
to be fixed in position on top of your Rearview mirror and
securely
hold the handsfree unit in place. Adjust the fitted unit to your
preference for clear rear
vision.
¨è Select a suitable position for the microphone
depending on your vehicle type, this should
be placed close to the
users head - the driver sun visor is normally adequate.
"It is highly recommended to have the front of
the microphone (side with more holes) directly facing
the operator for
the best voice pickup." The microphone can be
placed either back or front of the
visor by detaching, rotating and re-attaching
microphone holder to correct side of the
microphone.
¨é Clip a microphone on the driver's sun visor
recommended to keep a distance of
the microphone from the MHF-R330BT unit as long as possible.
¨ê Insert the power jack of the power adapter cable
(4M).
¨ë Connect the Power Adapter Cable into its
respective socket on the MHF-R330BT unit.
¨ì The power lead should be secured and hidden into
the vehicles interior using the seals
or joins around the windscreen
and door "A-Frame" and under your dashboard.
Ensure that you leave yourself
enough cable to be able to connect to your cigarette
lighter socket.
Note : Please ensure that the microphone and power cable do not
interfere with the safe
operation of your vehicle.
|
|
|
|
>>
Pairing your Bluetooth
cellular phone with the MHF-R330BT
|
|
|
|
The MHF-R330BT supports both HandsFree and Headset
Profiles. The default profile is HandsFree. Follow the pairing instructions for
the first use, after that the unit will pair automatically. |
|
|
|
|
Power On : It appears Start on the mirror.
Voice announcement "Power
On" |
|
|
|
|
|
|
1. When the power is on, press the "VOL ¡ã" button
for 3 seconds.
|
2. You will hear a beep tone. The
HandsFree
unit is now ready to be
paired for the first time.
It appears
Pairing on the mirror.
|
|
|
|
|
|
|
|
|
|
1. Browse your cellular phone menu and find the
connectivity and / or
Bluetooth connection section.
2. Select the "search for" a new HandsFree device
function and allow the phone to
find the MHF-R330BT.
Note : Each cellular phone type has distinct
phone menu so you may need to refer
to your manufacture's
instructions for the correct procedure on how to
"connect a
new Bluetooth device".¡¡
3. The Bluetooth code for the MHF-R330BT should appear on your cellular phone
screen.
4. Press the "connect" with the HandsFree option on
your cellular phone.
Note : Please
return to the pairing instructions if the Bluetooth code does not
appear on
the cellular phone screen. The green LED light should flash
during
pairing.
5. The cellular phone should prompt for a pin code.
Insert the MHF-R330BT
pin code : 1 2 3 4
6. The cellular phone should confirm that it has
established a new paired
connection.
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
Send Call :
Calling on
the mirror. |
|
|
Mute :
Secret on the
mirror. |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
>> Using
the MHF-R330BT as a
HandsFree Device
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To change handsfree ring tone
press and hold "VOL ¡å" button for 2
seconds.
Display will show Elod 1 or 2.
Elod 1 :
Voice announcing for caller ID
Elod 2 :
No voice announcing, Showing caller ID only.
Set to your chosen
option by repeating same
procedure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To control volume
press "VOL¡ã" / "VOL¡å" button
It appears Vol Up or Vol
Dn(down) on the mirror.
* Speaker Volume Level : 1 ~ 15
|
 |
|
|
|
|
|
|
|
|
The audio transfer function is for switching the call from the HandsFree unit
to the cellular phone for a private conversation without disconnecting the call.
Switching from HandsFree to cellular phone : Press and hold "END" button
(for 3 seconds)
Switching back
to HandsFree : Press and hold "END"
button (for 3 seconds)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note : This
function only works if you have a call waiting option with your carrier and also
another call is actually waiting to be
answered.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press and hold "SEND" button (for 2
seconds)
It appears Voice Dial on the
mirror.
Announce name after a beep. |
|
|
|
|
|
Note : Voice
dialling is possible only if your cellular phone has a voice dialling
capability.
Each cellular phone type has distinct phone menu so
you may need to refer to your manufacture's instructions. |
|
|
|
>>HandsFree Call (Send Call) in the
Car
|
|
|
|
|
Press phone number on the
cellular phone, and press "SEND"
button of HandsFree.
Note : If there is no sound on the loudspeaker of
HandsFree unit, press and hold "END" button for
3 seconds. Then,
it will switch from Cellular Phone to HandsFree.
Private conversation option:
The operator can plug
an earphone (not included) in to the earphone jack of the MHF-R330BT for a
private conversation.
Note : For your
own safety, it is highly recommended that the vehicle is parked in the safe
place
when plugging in the earphone.
|
|
|
|
|
|
|
|
|
|
|
|
PAIRING INSTRUCTION FOR THE SMART
PHONES |
|
|
|
Note :
A) Some of the advanced features
such as the voice caller ID would not properly work with the smart phones
featuring the HEADSET Profile only.
B) It is common for most of the
smart phones have the extra security feature (similar to the firewall in the
computer network system) requiring users to PAIR the smart phones with the
Bluetooth devices first and then go back to the connection feature in the phone
menu to Authorize the Bluetooth device to be permanently CONNECTED with the
handsfree system.
Let's try to pair the smart phones to the ModooFree BT handsfree unit as the
HANDSFREE profile first!
Please follow the below Initial pairing
instruction.
1. Make sure that the smart phone battery is
fully charged.
2. Clear/delete all Bluetooth devices registered in your smart
phone.
Also, turn off the unit and take out the battery (reset) and
reinsert the battery and turn on the unit.
3. Turn on the power of the
ModooFree BT handsfree unit.
4. Turn on the Bluetooth on the smart phone by
following the smart phone manual.
5. Press Vol(+) button of the ModooFree BT
handsfree unit for 5 seconds and wait for the confirmation melody.
6.
Discover the ModooFree BT handsfree units on your smart phone.
7. Once your
smart phone discovers the ModooFree BT handsfree unit, enter the Authentication
Passkey complete pairing.
8. If there is no connection, go
back to the Bluetooth Settings in your smart phone. Services tab and
make sure that the ModooFree BT handsfree unit is AUTHORIZED to be paired
with your smart phone. You will hear the paired confirmation melody
once ModooFree BT handsfree unit is paired with the smart phone.
* Pairng with the headset mode, the ModooFree
BT handsfree unit does not support the CALLER ID features.
Please repeat the step 1 to 4.
COMPATIBILITY:
The ModooFree BT Handsfree products
are compatible with most Bluetooth equipped mobile phones.
The ModooFree
BT Handsfree products support most of the Bluetooth mobile phones features such
as the last number dialing, Audio transfer, Caller ID, etc if the Bluetooth
mobiles contains such features.
Must Power off for vehicles with the DC auxiliary
power jack feature:
Some vehicles continuously
supply 12 Volt DC power to the auxiliary power jack (cigar jack) even the engine
is off and the ignition key is out of the vehicle.
The user must pull out the
power jack cord before exiting the vehicle making sure the Bluetooth unit power
is off. Otherwise, either the phone or handsfree would not function properly
requiring the user to turn both phone and handsfree off and reconnect by
following the manual. |
|
|
|
>>
Troubleshooting
|
|
|
|
|
> Bluetooth
Hansfree car kit
No indication from unit?
There
is a chance the power cable plug is not correctly seated in the cigar/utility
jack socket for proper connection. Remove and reinsert to ensure good fitting
and connection.
Problem during pairing?
Repeat pairing
process according to the pairing section
Still experiencing problem?
Turn
off the cellular phone and separate the battery from the cellular phone for
approximately five seconds (In some instances, this action clears up any
potential bugs built up in the cellular phone software that can hinder proper
pairing.) Repeat pairing process as per previous pairing instructions.
Too
loud?
Adjust the volume to your preferred sound level by
pressing the relevant volume switch.
Callers are complaining about hearing
noise?
Check that the microphone is secured firmly in place
and is not creating vibration and noise. Also check and adjust microphone
accordingly to ensure that it is facing towards to the user¡¯s
face.
> Parking Sensor Kit
The sensor does not work while engaged in
"Reverse".
- Check to see if the power cable is
connected to the rear light.
- Check to see if the power cable and the
alarm cable are connected to the alarm.
The sensor does not detect obstacles. Only (0.0) is
displayed.
- Check to see if the sensor cable and alarm
cable are connected.
- Check to see if the alarm cable is connected to
the alarm.
- Check to see if the sensor is obstructed by dirt.
-
Check to see if any sensor is detected with the earth.
|
|
|
|
>> Safety
Precautions
|
| |
|
- Do not expose this unit under humid
environment.
- Do not drop this unit.
- Do not disassemble this
unit.
- Do not press two buttons at once. This action may cause a sudden
Bluetooth disconnection.
- Do not clean the unit with any chemical or
water.
- Keep this unit away from fire and dust.
- For safety reasons,
please keep your phone conversation short, do not make any notes or read
documents. It is highly recommended to park the vehicle in the safe place
before
continuing the conversation. Using a cellular phone while driving
can potentially create a
distraction for the driver which may increase the
likelihood of an accident.
- Please adjust direction of the mirror to ensure
good Rearview vision for safe driving
- Use the third-level alarm only
when the obstacle is located in a straight line from the vehicle.
- Attach
the sensor level with the ground surface.
- Keep water away from the alarm
(ModooFree Plus BT).
- Thin rods or objects, objects with a high tint angle,
and sound-absorbing objects cannot be detected.
- Beware that the power
cable or sensor cable may be cut if excessive force is used during
installation.
- The area just under and to the right and left ends of the
rear bumper cannot be detected.
* The instruction of this
manual may be different from some Bluetooth phones
according to the
phone¡¯s manufacturer or its unique function.
|
|
|
| >> Warranty
|
|
|
| Sungjin Techwin Co., Ltd. warrants to purchaser that for a period of one (1) year after
the date of purchase (the ¡°Warranty Period¡±) of any Sungjin Techwin Co., Ltd. Product by
Purchaser, the product will substantially conform to Sungjin Techwin Co., Ltd. published
specifications for the product on the date of purchaser¡¯s purchase of the
product, subject to the terms herein. Purchaser shall notify Sungjin Techwin
Co.,
Ltd. of
any non-conformance during the warranty period and obtain a written return
material authorization (¡°RMA¡±) from Sungjin Techwin Co., Ltd. for the nonconforming
product and return the nonconforming product to Sungjin Techwin Co., Ltd. freight prepaid
with a statement describing the nonconformity. Sungjin Techwin Co., Ltd. exclusive
obligation with respect to nonconforming product shall be, at Sungjin Techwin
Co.,
Ltd.¡®s
option and expense, to repair or replace such returned item. The foregoing is
purchaser¡¯s sole and exclusive remedy for breach of warranty by Sungjin Techwin
Co.,
Ltd.¡®s with respect to the product. The warranty set forth above shall not apply
to any product, which has not been properly used or handled in accordance with
the instructions supplied by Sungjin Techwin Co., Ltd. In addition, Sungjin
Techwin
Co.,
Ltd.¡®s
warranty is void if the product has been repaired, altered, damaged by the
faulty installation, misuse, abuse, or which the product defect is attributable
to any failure or damage which is beyond the reasonable control of Sungjin Techwin
Co.,
Ltd. This warranty applies only to new Sungjin
Techwin
Co.,
Ltd. products purchased from
authorized retail sellers only. The foregoing warranties are the sole
warranties, express or implied, given by Sungjin Techwin Co., Ltd. in connection with the
product, and Sungjin Techwin Co., Ltd. disclaims all other warranties, including
warranties of merchantability, fitness for a particular purpose and no
infringement of third party rights. Sungjin Techwin Co., Ltd. shall not be liable for any special, incidental or
consequential damages in connection with the product, even if Sungjin Techwin Co., Ltd.
has been advised of the possibility of such damages. The liability of Sungjin
Techwin
Co.,
Ltd. hereunder for all claims shall not exceed the amount paid by purchaser to
Sungjin Techwin Co., Ltd. for the product sold rise to Sungjin Techwin Co.,
Ltd.¡®s liability.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and
any use of such marks by Sungjin Techwin Co., Ltd. is under license. Other trademarks and
trade names are those of their respective owners.
|
|
|
|
|
|
|
|
2. Installation on the Parking
Sensor Kit
|
|
|
|
|
With a built-in Parking Sensors by ultrasonic
sensors inside the rear mirror, while backing the vehicle, the sensor senses the
distance from the right, left, rear and indicates the distance via LED digits
(0.4m~1.6m) & left & right and also by four stages of warning
signals(beep sounds) which helps the driver while backing the
vehicle.
|
|
|
|
Product Overview
The Parking Sensor helps the
driver view the rear of the vehicle. It helps prevent collisions and accidents
during any backward movement of the vehicle. If there is an obstacle at the rear
of the car, the alarm inside the vehicle displays the distance to the obstacle
and generates a signal proportional to it.
|
|
|
|
|
Features of the
Product
- Enables safe backward movement by detecting
obstacles in the rear.
- Insures a safe distance in the event of snow, rain,
frost or fog.
- Insures a safe distance between an obstacle and the rear of
the vehicle while parking and
stopping.
- Easily installed and
semi-permanent.
- Good design which matches the vehicle (Attach Type
sensors).
- Displays the distance to the obstacle from the back of the
vehicle while backing-up within 0.4m.
- Informs the driver of the proximity
of obstacles on the left and right sides of the vehicle.
- Generates a
four-level alarm signal depending on the distance to the
obstacle.
|
|
|
|
|
Method of
Operation
The Parking Sensor beeps and the distance meter
displays as "0.0" as soon as you engage the reverse gear. An alarm is generated
if an obstacle is detected within the first-level detection area(within 1.6m),
and the distance meter displays the distance to the obstacle. The alarm changes
as the obstacle approaches the second-level (within 1.0m) and third-level
(within 0.6m) detectionarea. When the obstacle is within 0.4m, a continuous
alarm is generated. If the driver does not hear the alarm due to noise or weak
hearing ability, the distance meter and the left/right lamps indicate the
proximity of the obstacle.
|
|
|
|
|
>> Product
installation
|
|
|
|
|
|
Connecting the parking system to the ModooFree Plus
BT
Install the control box at the left or right sides of the
rear seat beyond the reach of passengers' hands.
Pull the main cable out
of the windshield or pedal and connect it to the control box.
Connect the
sensor cable and the power cable to the control box.
Use the cable-tie to
organize the loose cables. |
|
|
|
|
>>
Product Constituents (Reversing Sensors
Kit)
|
|
|
|
|
|
|
|
|
|
Installation
Method
|
|
|
|
|
|
|
|
|
|
After attaching the
sensor, attach the mount to the trunk and fix the sensor cable with the cable
tie. Then, pull the sensor cable to one side of the trunk and put it in the
control box.
|
|
|
|
|
|
|
|
|
|
|
Apply the Two-sided
tape to the sensor attachment. Attach the sensor to the trunk or rear lights at
about 50-80cm(20"-32") (normally 60cm(23.5")) from the center of the
car.
¡Ø Caution : The sensor may be positioned upside
down.
|
|
|
|
|
|
|
|
|
|
|
Connect
the power cable.
Generally,
black cables are (-) in vehicles.
In the case of the ModooFree Plus
BT Cable, do not peel off the cable - covering connect it using a line
connector.
¡Ø Caution - Beware
of the (±)
polarity.
|
|
|
|
|
|
|
|
|
|
|
B. Put up the power
cable in the line connector as "A".
C. Press the clip
with a long nose plier.
D. Close the door of
line connector.
|
|
|
|
|
|
|
|
|
|
|
Attach the ModooFree Plus BT body onto the existing rearview
mirror.
Fix the connector ay the parking sensor plug of the ModooFree
Plus BT.
|
|
|
|
|
|
Fix the connector with the control box
label at one side of the alarm cable (7m) to the
control box
connector.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
> It is better to
arrange the cables along the left side of the frame (by the driver's
seat).
> Make certain that water cannot contact the sensor while
driving.
> The main cable should be long enough to compensate for
the contours of the driver's
seat.
> The main cable should be kept
away from the engine, if possible.
|
|
|
|
|
|
|
|
|
|
|
|
|
Bore two
holes on the left and right sides with a drill, so that the bracket can be fixed
with screws. |
|
|
Attach at the center
for a 1-ton truck, and at the rear gutter for a larger
truck.
|
|
|
|
|
|
